Variable Speed Chain Hoist | Die Setter Electric Hoist
Set Dies and Molds Precisely with Ultra Low Speed Hoist Positioning
Specifically designed to improve mold placement accuracy, the two-speed die setter low speed electric hoist features ultra low speed hook movement for exact die positioning as well as the standard speed for normal use. To reduce die impact damage and shock loading conditions, the low speed setting may be set to 1.5 feet per minute without sacrificing the normal lift speed of the electric hoist.
The variable speed hoist feature permits fine mold positioning without continuous hoist jogging. Low speed hook travel on David Round's die setter electric hoist is available in both the up and down directions unlike other creep or step-controlled hoists that may only lower at the low speed setting.
With these electric hoist products, both the standard and low speed settings may be adjusted in the field to meet specific application requirements. A variety of pendant configurations are available as well as low-speed trolleys, jib cranes and monorail systems.
- Position and handle dies at ultra low speeds as low as 1.5 FPM
- Various models available from 1/2 to 5 ton load capacities
- Position loads precisely with continuously jogging hoist
- True vertical lifting path eliminates side-to-side hook travel
Benefits of the Die Setter Electric Hoist
- Accurately align mating equipment and mold sections with precise load control
- Increase hoist motor life by eliminating the need for continuous hoist jogging
- Eliminate re-calibration time by gently loading sensitive testing and measuring equipment
- Replace expensive air-powered hoists with this economical electric chain hoist
Applications for Variable Speed Electric Hoist Products
Plastic Molding and Metal Forming
- Set and remove dies slowly to ensure safe handling
- Lower mold sections onto guide pins without misalignment
Machining, Fabrication and General Assembly
- Accurately load large work pieces onto high-precision machining centers
- Carefully load large diameter turnings onto calibrated out-of-round inspection stations
- Lower decks and cabins onto boat hulls while building yachts and ships
- Place high-performance engines and turbines onto carefully aligned engine mounts
- The normal hook speed of the hoist is also useable to permit the handling of standard loads and products
Hoist Hook Speeds
|
These speeds are the preset factory speeds and are the fastest and slowest speeds available for the specific electric hoist capacity and level of use. However the low speed setting may be increased and the high speed setting may be decreased in the field to meet specific application requirements. |
|||||||||||||||||||||||||||||||||||||||
Standard Features of Variable Speed Electric Hoist Products
- Two Adjustable Hoist Speeds
- Ultra Low Speed
- Normal Speed - Controls with AC Inverter Drive
- Fully-Enclosed Gearing with Oil Bath Lubrication
- Mechanical Brake
- Electric Brake
- Upper and Lower Hook Position Limit Switch
- Chain Container
- 10 Ft. Lift Height
- 8 Ft. Pendant Cord
- 15 Ft. Power Cord
- Hook Mounted
Optional Features
- Additional Lift Heights and Pendant Cord Lengths
- Multiple-Speed Variations
- Manual and Motorized Trolleys
- Hoist, Crane and Monorail Packages
Standard Pendant Configurations
Two-Position Up/Down Buttons
First Position — Ultra Low Speed
Second Position — Normal Speed
One-Position Up/Down Buttons
Includes Selector Switch for Ultra Low Speed / Normal Speed Mode
Variable Speed Chain Hoist Product Literature
